Trailer Parts Superstore® offers a wide variety of boat trailer roller hardware. We stock galvanized boat trailer roller brackets, zinc plated roller shafts, shaft pal nuts, hog rings, wobble roller washers, hog ring / washer kits, roller bushings, u-bolts, pivot assembly parts and much more.
Stock# 5212187 Use these compact Spool roller brackets when the beam spacing won't allow using a panel bracket. (2) galvanized brackets included, roller is not included.
Stock# 5256055 5" long slots on 2" center, 1/2" or 5/8" shaft. Brackets are one piece, heavy duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Slots accept 7/16" or 1/2" bolts and provide vertical roller adjustment.
Stock# 5256056 5" long slots on 3" center, 1/2" or 5/8" shaft. Brackets are one piece, heavy duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Slots accept 7/16" or 1/2" bolts and provide vertical roller adjustment.
Stock# 5256057 5" long slots on 6" center, 1/2" or 5/8" shaft. Brackets are one piece, heavy duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Slots accept 7/16" or 1/2" bolts and provide vertical roller adjustment.
Stock# 5256097 5" long slots on 8" center, 1/2" or 5/8" shaft. Brackets are one piece, heavy duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Slots accept 7/16" or 1/2" bolts and provide vertical roller adjustment.
Stock# 5256058 5" long slots on 10" center, 1/2" or 5/8" shaft. Brackets are one piece, heavy duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Slots accept 7/16" or 1/2" bolts and provide vertical roller adjustment.
Stock# 5256136 Zinc plated rolled steel construction. Package includes two 1/2" pal nuts. Boat trailer roller shaft for use with 3" long x 1/2" ID rollers.
Stock# 5256323 Galvanized roller shaft kit includes two 1/2" pal nuts and one 5-1/4" x 1/2" galvanized roller shaft. Boat trailer roller shaft for use with 4" long x 1/2" ID rollers.
Stock# 5256324 Galvanized roller shaft kit includes two 1/2" pal nuts and one 6-1/4" x 1/2" galvanized roller shaft. Boat trailer roller shaft for use with 5" long x 1/2" ID rollers.
Stock# 5256325 Galvanized roller shaft kit includes two 5/8" pal nuts and one 5-1/4" x 5/8" galvanized roller shaft. Boat trailer roller shaft for use with 4" long x 5/8" ID rollers.
Stock# 5256326 Galvanized roller shaft kit includes two 5/8" pal nuts and one 6-1/4" x 5/8" galvanized roller shaft. Boat trailer roller shaft for use with 5" long x 5/8" ID rollers.
Stock# 5256327 Galvanized roller shaft kit includes two 5/8" pal nuts and one 9-1/4" x 5/8" galvanized roller shaft. Boat trailer roller shaft for use with 8" long x 5/8" ID rollers.
Stock# 5256328 Galvanized roller shaft kit includes two 5/8" pal nuts and one 11-1/4" x 5/8" galvanized roller shaft. Boat trailer roller shaft for use with 10" long x 5/8" ID rollers.
Stock# 5256329 Galvanized roller shaft kit includes two 5/8" pal nuts and one 13-1/4" x 5/8" galvanized roller shaft. Boat trailer roller shaft for use with 12" long x 5/8" ID rollers.
Stock# 5256145 Zinc plated rolled steel construction. Package includes two 5/8" pal nuts. Boat trailer roller shaft for use with 18" long x 5/8" ID rollers.
Stock# 5291137 EZ-LOADER boat trailer 1-3/8" O.D. x 1/2" I.D. (Derlin) washer. Delrin is a lightweight, low friction, and wear resistant plastic capable of operating in 200° Fahrenheit or higher.
Stock# 5291135 EZ-LOADER boat trailer 2-5/8" O.D. x 1/2" I.D. (Derlin) washer. Delrin is a lightweight, low friction, and wear resistant plastic capable of operating in 200° Fahrenheit or higher.
Stock# 5291136 EZ-LOADER boat trailer 4" O.D. x 11/16" I.D. (Derlin) washer. Delrin is a lightweight, low friction, and wear resistant plastic capable of operating in 200° Fahrenheit or higher.
Stock# 1041010 LoadRite Hog Ring for old style (pre-2003) Black Rubber wobble roller assemblies. When compressed hog ring fits 1-1/8" O.D. roller arms.
Stock# 5291040 EZ-LOADER hog ring secures boat trailer wobble rollers to arm and shaft assemblies. 13/16" I.D. x 1-1/2" O.D. before being compressed onto the roller arm.
Stock# 5256269 Nylon wobble roller bushing fits the new Venture Roller #48655 or any other roller with a 1-1/2" ID. Dimensions: 7/8" I.D. x 1-1/2" O.D. x 1-1/2" long
Stock# 5256270 Nylon wobble roller bushing fits the new Venture Roller #48655 or any other roller with a 1-1/2" ID. Dimensions: 1-1/8" I.D. x 1-1/2" O.D. x 1-1/2" long
Stock# 5256356 TIEDOWN Wobble Roller Bracket Mounting Kit features a pair of 5-1/4" wide by 4-3/4" tall galvanized brackets that allow for pivoting of bunk boards or roller assemblies. Comes with 5" x 1/2" bolt with nut and 2 washers.
Stock# 1041424 4.75" long x 1.78" wide pivot bar for 2 and 4 wheel LOADRITE Wobble Roller assemblies. Replacement aluminum pivot bar bolts to bottom of wobble roller assembly and pivots on bearing pad.
Stock# 5454048 4.75" long x 2.75" wide pivot bar for 2 and 4 wheel SeaLion / TideWater Wobble Roller assemblies. Replacement aluminum pivot bar bolts to bottom of wobble roller assembly and pivots on bearing pad.
Stock# 5454047 4.75" long x 2.75" wide pivot bar for 2 and 4 wheel SeaLion / TideWater Wobble Roller assemblies. Replacement aluminum pivot bar bolts to bottom of wobble roller assembly and pivots on bearing pad.
Stock# 1041425 4.75" long x 2.68" wide pivot bar for 2 and 4 wheel LOADRITE Wobble Roller assemblies. Replacement aluminum pivot bar bolts to bottom of wobble roller assembly and pivots on bearing pad.
Stock# 5291164 EZ-LOADER aluminum 15" single bent roller arm is for use with double-single slide arms. Meant to carry one roller on one end only. End is pre-drilled to accept hog ring fasteners.
Stock# 5291162 EZ-LOADER aluminum double roller arm is for use with 'multiple" roll systems. Will hold 2 rollers, one on each end. Attaches in the center to an aluminum arm. Ends are pre-drilled to accept hog ring fasteners and are to be used with 1" rollers.
Stock# 5291169 EZ-LOADER aluminum double roller arm is 20" in length and is to be used with a roller on each end. It has a center hole drilled to allow left-right pivoting. Ends are pre-drilled to accept hog ring fasteners.
Stock# 1041337 16.14" x .75" x .120" galvanized wobble roller beam for LOADRITE (5-Starr) wobble roller assemblies. Has pre-drilled holes. Mounting and roller hardware not included.
Stock# 5454033 13-1/4" long aluminum wobble/track roller bar for SeaLion / TideWater Dual-Roller wobble roller assemblies. Use two bars to make a Left Hand or Right Hand dual wobble roller assembly.
Stock# 1041027 12-3/4" long aluminum wobble/track roller bar for LoadRite Dual-Roller wobble roller assemblies. This bar works specifically with the LoadRite logo bushing rollers.
Stock# 5421054 VENTURE hot dipped galvanized wobble roller shaft for mounting 1 pair of 3/4" I.D. rollers. Measures 17-1/4" long with 3/4" x 2-3/8" round roller shaft surfaces on each end. Factory OEM wobble roller shaft used by Venture Boat Trailers and other trailer companies.
Stock# 5421035 VENTURE 13-1/2" long aluminum wobble/track roller shaft for Dual-Roller wobble roller assemblies. Use two bars to make a Left Hand or Right Hand dual wobble roller assembly.
Stock# 5419002 KARAVAN high strength plated steel frame replacement roller bar for the 2-wheel roller assembly. Will accept rollers with a 1" I.D. roller shaft bushing.
Stock# 5291182 EZ-LOADER 2" wide x 2" tall x 23.88" long .120" thick hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on boat trailers.
Stock# 5454032 SeaLion / TideWater 2" wide x 2" tall x 30" long hot dip galvanized roller pivot bar mounts front-to-back over a trailer crossbar. Used to support wobble roller assemblies on boat trailers.
Stock# 1041255 2" wide x 2" tall x 32" long hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on boat trailers.
Stock# 1041307 LOADRITE 2" wide x 3" tall x 38.75" long hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on boat trailers.
Stock# 5454031 2" wide x 3" tall x 48" long hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on SeaLion / TideWater boat trailers.
Stock# 5454030 SEA LION 2" wide x 3" tall x 32" long hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on Sea Lion / TideWater boat trailers.
Stock# 1041218 LOADRITE 2" wide x 3" tall x 32" long hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on boat trailers.
Stock# 5422121 ShoreLand'r factory O.E.M. rear pivot bar for 44" wide frames. This pivot bar has pre drilled holes and accepts adjustable and fixed mount quad roller assemblies. Pivot bar measures 41" in length and is constructed with high strength black painted steel. Includes mounting hardware. SUPPLIES LIMITED - 2 left in stock
Stock# 5422119 ShoreLand'r factory O.E.M. rear pivot bar for 44" wide frames. This pivot bar has pre-drilled holes and accepts adjustable and fixed mount quad roller assemblies. Pivot bar measures 41" in length and is constructed with high strength galvanized steel. Includes mounting hardware. SUPPLIES LIMITED - 1 left in stock
Stock# 5421045 VENTURE hot-dipped galvanized roller tongue bracket measures 12" long and has five 3/8" mounting holes. The hole for the roller accepts a 5/8" roller shaft. Sold as each but requires 2 to make an assembly.
Stock# 5421099 VENTURE galvanized steel roller mounting pivot channel is used to attach roller assemblies and set proper angle. Bracket measures 3-1/4" wide x 32" long and accepts 2 dual venture roller assemblies. All mounting hardware and roller assemblies are sold separately.
Stock# 5421029 Galvanized steel roller mounting pivot channel is used to attach roller assemblies and set proper angle. Bracket measures 3-1/4" wide x 32" long and accepts 2 dual venture roller assemblies. All mounting hardware and roller assemblies are sold separately.
Stock# 5421030 Galvanized steel roller mounting pivot channel is used to attach roller assemblies and set proper angle. Bracket measures 3-1/4" wide x 32" long and accepts 3 dual venture roller assemblies. All mounting hardware and roller assemblies are sold separately.